E-mail Notification at the End of a Copy Job (Job Done Notice)
2-53
Ad
dit
ion
al Co
py
Fun
c
ti
o
n
s
2
E-mail Notification at the End of a Copy Job
(Job Done Notice)
This feature enables you to send a <Job Done> notification to specified e-mail addresses when a
copy job is complete.This is useful when waiting for large copy jobs to end or when using the
remote copying features. To send a Job Done Notice, you need to store e-mail addresses in an
Address Book beforehand. (See “Chapter 4 Registering/Editing the Address” in the Sending
Guide.)
IMPORTANT
•
[Job Done Notice] is only available on the iR6020i/iR5020i.
1
Place your originals, and press [Special Features]
→
[Job Done Notice] in
this order.
2
Select the destination to send the Job Done Notice, and press [OK]
→
[Done] in this order.
If Access Number Management for an Address Book is set to <On>, press [Access Number] and
enter the access number to specify the address, and press [OK]. If you do not want to specify an
access number, press [No Access Number]. (See “Chapter 4 Registering/Editing the Address” in
the Sending Guide.)
The specified mode is set, and the display returns to the Basic Features screen.
NOTE
•
For recipient settings, see “Chapter 1 Various Sending Methods” in the Sending Guide.
•
You cannot select multiple destinations.
