Setting Automatic Collate
3-5
Setting/Storing Spe
c
ification
s
o
f
the
C
op
y Fu
nctio
n
3
Setting Automatic Collate
This function automatically selects the Collate (Offset Collate) mode when the original is placed in
the feeder. This is helpful when making multiple copies, because the user does not need to
remember to select the Finisher mode.
NOTE
•
When <Auto Collate> is set to <On> and you set the originals on the Feeder, the collate mode is
automatically selected as listed below.
- [Offset Collate]: When the Finisher (optional) or Shift Tray-B1 (optional) is attached
- [Collate]: When the Copy Tray-C3 is attached
•
The default setting is <On>.
1
Call up the desired screen as follows:
→
[Copy Settings]
→
[Auto Collate]
2
Select [On] or [Off], and press [OK].
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
