Canon iR3300 Series, Reference Manual, Page: 79 / 362

Making Prints Using the Stack Bypass 1-49 1-49 1-49 1-49
1
1 1
1
Be
fo
re
Y
ou S
tar
t Us
ing
T
hi
s M
a
c
h
in
e
2 2 2 2
Adjust the slide guides to the size of the paper.
Adjust the slide guides to the size of the paper. Adjust the slide guides to the size of the paper.
Adjust the slide guides to the size of the paper.
When feeding large-size paper, pull out the auxiliary tray.
3 3 3 3
Load the paper in the stack bypass.
Load the paper in the stack bypass. Load the paper in the stack bypass.
Load the paper in the stack bypass.
Make sure that the height of the paper stack does not exceed the limit mark ( ).
Align the required number of sheets of paper with the slide guides. The surface that you want to print
on must be placed face up. Insert the paper into the machine until it stops.
IMPORTANT
••••
If Stack Bypass Standard Settings are set to ‘On,’ you can load only the registered paper types in the
stack bypass.
Slide Guide
Slide Guide Slide Guide
Slide Guide
Auxiliar y tray Auxiliar y tray Auxiliar y tray Auxiliar y tray