Canon iR3300 Series, Reference Manual, Page: 35 / 362

About the Installation Location and Handling 1-5 1-5 1-5 1-5
1
1 1
1
Be
fo
re
Y
ou S
tar
t Us
ing
T
hi
s M
a
c
h
in
e
n
Avoid exposing the machine to rapid changes in temperature.
Avoid exposing the machine to rapid changes in temperature. Avoid exposing the machine to rapid changes in temperature.
Avoid exposing the machine to rapid changes in temperature.
If the room in which the machine is installed is rapidly heated from a low temperature,
condensation may form inside the machine. This can adversely affect print quality or result in
an inability to obtain print images.
n Avoid installing the machine near computers or other precision electronic equipment. Avoid installing the machine near computers or other precision electronic equipment. Avoid installing the machine near computers or other precision electronic equipment. Avoid installing the machine near computers or other precision electronic equipment.
Electrical interference and vibrations generated by the machine during printing can adversely
affect the operation of such equipment.
n
Avoid installing the machine near televisions, radios, or similar electronic equipment.
Avoid installing the machine near televisions, radios, or similar electronic equipment. Avoid installing the machine near televisions, radios, or similar electronic equipment.
Avoid installing the machine near televisions, radios, or similar electronic equipment.
The machine might interfere with sound and picture signal reception, etc. Plug the machine
into a dedicated power outlet and maintain as much space as possible between the machine
and other electronic equipment.
n About the machine’s fixing stoppers. About the machine’s fixing stoppers. About the machine’s fixing stoppers. About the machine’s fixing stoppers.
Do not remove the machine’s fixing stoppers after the machine has been installed.
If you put weight on the front of the machine while the paper drawers or units within the
machine are pulled out all the way, the machine might fall forward. To prevent this from
happening, make sure that the machine's fixing stoppers are set in place.