Canon iR3300 Series Reference Manual Download Page 325

Page: 325 / 362

Inner 2way Tray-A1

7-77

ndl

g O

ons

CAUTION

••••

When closing the cover, be careful not to get your fingers caught, as this may result in

personal injury.

Connect the finisher to the main unit.

When the finisher is not attached, this step is not necessary.

CAUTION

••••

When returning the finisher to its original position, be careful not to get your fingers caught, as

this may result in personal injury.

Follow the instructions on the touch panel display.

NOTE

••••

For details of the screen indicating how to remove the paper jam, see ‘Screen Shown When There Is
a Paper Jam,’ on p. 6-2.

Summary of Contents for iR3300 Series











































































































































































































































































































































































Search results

Summary of Contents for iR3300 Series

Reviews:

Canon iR3300 Series, Reference Manual, Page: 325 / 362

Search results

Summary of Contents for iR3300 Series

Reviews: