Canon iR3300 Series, Reference Manual, Page: 78 / 362

Making Prints Using the Stack Bypass 1-48 1-48 1-48 1-48
1
1 1
1
Be
fo
re
Y
ou S
tar
t Us
ing
T
hi
s M
a
c
h
in
e
n
Envelope
Envelope Envelope
Envelope
The following envelopes can be loaded into the envelope cassette: COM10, ISO-B5,
Monarch, ISO-C5, DL, and Yougata 4.
1 1 1 1
Open the stack bypass.
Open the stack bypass. Open the stack bypass.
Open the stack bypass.
l
If the specified paper has already been loaded in the Stack Bypass:
If the specified paper has already been loaded in the Stack Bypass: If the specified paper has already been loaded in the Stack Bypass:
If the specified paper has already been loaded in the Stack Bypass:
Press “Paper Select,” and press “Stack Bypass” to specify the loaded paper. Proceed to Step 6.
NOTE
••••
If the paper size loaded in the stack bypass is different from the paper size stored in the Standard
Stack Bypass Settings, set the Stack Bypass Standard Settings to “Off.” (See ‘Setting the Standard
Paper for the Stack Bypass,’ on p. 3-25.)
l
If paper different from that specified is loaded in the Stack Bypass:
If paper different from that specified is loaded in the Stack Bypass: If paper different from that specified is loaded in the Stack Bypass:
If paper different from that specified is loaded in the Stack Bypass:
Check to see if any job is reserved. (See ‘Flow of Checking/Changing Operations,’ on p. 2-2.)
If there is a current/reserved job, reserve a change for the stack bypass. (See ‘Using the Stack Bypass
While Reserving Print Jobs,’ on p. 1-55.)
When there is no reserved job, remove the paper and continue the procedure from step 2.