Canon iR3300 Series, Reference Manual, Page: 190 / 362

Loading Paper 5-4 5-4 5-4 5-4
5
5 5
5
Rout
ine
Ma
int
enan
ce
IMPORTANT
••••
Rewrap any remaining paper in its original package, and store it in a dry place, away from direct
sunlight.
••••
Do not load the following types of paper in the paper drawer. Doing so may cause a paper jam.
- Severely curled or wrinkled paper
- Heavyweight paper
- Transparencies
- Paper on which colour images have been copied.
- Paper which has been copied on using a digital full colour copier (do not copy on the reverse side
either).
- Paper which has been printed on using a thermal transfer printer (do not copy on the reverse side
either).
NOTE
••••
For high-quality print output, use paper recommended by Canon.
4
4 4
4
Turn the opened surface of the paper stack over, and place it in the paper Turn the opened surface of the paper stack over, and place it in the paper Turn the opened surface of the paper stack over, and place it in the paper Turn the opened surface of the paper stack over, and place it in the paper
drawer.
drawer. drawer.
drawer.
Even out the edges of the paper stack. Load the paper stack against the right wall of the paper drawer.
When loading paper in the paper drawer for the first time, set the size plate for the paper being loaded.
When loading paper in the paper drawer, make sure that the paper size setting of the paper drawer
matches the size of paper.
IMPORTANT
••••
If the paper is curled, curl it down before placing it in the paper drawer.
••••
Make sure that the height of the paper stack does not exceed the limit mark at the back of the
paper drawer.
NOTE
••••
Each paper drawer holds about 500 sheets of paper (80 g/m
2
).
••••
For details of the print direction of paper already printed with logos or patterns, see ‘Relation of
Original Orientation and Paper Orientation,’ on p. 8-9.