Canon iR2230 Printer Manual Download Page 43

Page: 43 / 62

Settings Menu

2-23

inter Setti

ngs Men

Copy Set Numbering

■

Copy Set Numbering

On, Off

This setting enables you to print documents with a five digit serial number in the background on
each copy. When [On] is selected, Print Position, Starting Number, Number Size, and Density
options become available.

Copy numbers are printed in the following methods:

When printing three copies of a five page document:

NOTE

•

This function is not available for the iR3530/iR2230.

•

While the machine is operating in this setting, you cannot use Group modes for the
Finisher option. Instead, Group is automatically used.

•

If the copy number has fewer than five digits, the machine prints it as follows:
- Example: If the copy number is 10

➞

00010

•

Copy numbers are not printed on blank pages (pages with no data).

•

If this setting is used in combination with [Margin] or [Offset X/Offset Y], part of the copy number
may be cut off.

•

This function is not available if the Booklet or Transparency Interleaving option is specified as any
setting other than 'Off'.

•

If the number of printed copies exceeds '99999', it returns to '00001'.

00001

Copy Number

00001

First Copy

00002

00003

Second Copy

Third Copy

Summary of Contents for iR2230































































Search results

Summary of Contents for iR2230

Reviews:

Related manuals for iR2230

Brands by name

Popular brands

Canon iR2230, Printer Manual

Search results

Summary of Contents for iR2230

Reviews:

Related manuals for iR2230

Brands by name

Popular brands