Canon iR2030 Service Manual Download Page 78

Page: 78 / 418

Chapter 2

2-6

2.2 Unpacking and Installation

2.2.1 Unpacking and Removing the Packaging Materials

0017-5523

iR2025 / iR2030 / iR2018 / iR2022

1) Unpack the machine and remove vinyl, cushioning materials, and tape.
2) Hold the handles [1] of the machine together with one or more persons and

take it out.

F-2-7

2.2.2 Unpacking and Removing the Packaging Materials

0017-5524

iR2022i / iR2018i

1) Unpack the machine and remove vinyl, cushioning materials, and tape.
2) Hold the handles [1] of the machine together with one or more persons and

take it out.

F-2-8

2.2.3 Installing the Drum Unit

0017-5525

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Open the front cover [1] of the iR body.

F-2-9

The maximum weight of this machine is approximately 46kg. Two or more
persons are required to lift the machine.

[1]

The maximum weight of this machine is approximately 53kg. Two or more
persons are required to lift the machine.

[1]

Summary of Contents for iR2030



































































































































































































































































































































































































































Search results

Summary of Contents for iR2030

Reviews:

Brands by name

Popular brands

Canon iR2030, Service Manual

Search results

Summary of Contents for iR2030

Reviews:

Brands by name

Popular brands