Canon iR2030 Service Manual Download Page 243

Page: 243 / 418

Chapter 9

9-5

9.4 Parts Replacement Procedure

9.4.1 External Covers

9.4.1.1 External Covers

9.4.1.1.1 Removing the Lower-left Cover

0017-8590

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the lower-left cover [2] by opening the rear support [1] with a

slightly strong force applied in the direction of the arrow.

F-9-8

9.4.1.2 Delivery Tray

9.4.1.2.1 Removing the Delivery Tray

0017-8615

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the rear cover.
2) Open the front cover.
3) Detach the right cover (lower).
4) Detach the delivery tray [1].

- Screw [2], 2 pcs.

F-9-9

9.4.1.3 Right Cover (Lower)

9.4.1.3.1 Removing the Right Cover (Lower)

0017-8617

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the rear cover.
2) Open the front cover.
3) Remove the two hooks [2], and then detach the right cover (lower) [3].

- Screw [4], 5 pcs.

F-9-10

9.4.1.4 Right Cover (Upper)

9.4.1.4.1 Removing the Right Cover (Upper)

0017-8620

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the rear cover.
2) Open the front cover.
3) Detach the right cover (lower).
4)Detach the right cover (upper).

- Screw [2], 1 pc.

F-9-11

9.4.1.5 Rear Cover

9.4.1.5.1 Removing the Rear Cover

0017-2246

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the rear cover [1].

- 4 screws [2]

F-9-12

9.4.1.6 Left Cover (Rear)

9.4.1.6.1 Removing the Rear Left Cover

0017-2247

iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i

1) Detach the rear left cover [1].

- 3 screws [2]

[2]

[1]

[2]

[1]

[4]

[3]

[1]

[2]

[1]

[2]

[1]

[2]

Summary of Contents for iR2030



































































































































































































































































































































































































































Search results

Summary of Contents for iR2030

Reviews:

Brands by name

Popular brands

Canon iR2030, Service Manual

Search results

Summary of Contents for iR2030

Reviews:

Brands by name

Popular brands