Canon iR2030, Service Manual

Page: 379 / 418

Chapter 15
15-57
F-15-23
ADF feed test (6-4: ADF FEED TEST)
ADF operation verification mode. Press numeric keypad key 4 on the FUNCTION TEST menu to select the ADF feed test. Place a document on the document
platen and press the start key to transfer the document at the speed matched to the scan resolution setting. In this test, enter a transfer speed between 500 and 2000
(mm/s) from the numeric keypad and verify the transfer speed. Select between the ON and OFF states with the left and right cursor keys to select between single-
sided document feed (OFF) and double-sided document feed (ON).
Book feed test (6-5: BOOK FEED TEST)
Performs a book feed operation with a specified magnification and in a specified size.
Speaker test (6-6: SPEAKER)
Speaker operation verification mode. Press numeric keypad key 6 on the FUNCTION TEST menu to select the speaker test. In this test, the speaker generates tonal
signals at 100 Hz intervals, from 200 Hz to 5 kHz, in varying sound volumes. Signal output from the speaker is thus verified.
Press numeric keypad key 4.
BSCT on BDOC[A3 ]
BDSS3-0 [of of of of]
Press numeric keypad key 5.
NCR Sts : 12345678
DPT MGN OK RDY 1234
[1] Card reader and card availability indication
Card available: Eight-digit card ID
No card: Card None
No card reader available: NCR None
[2] Card type and card reader status indication
DPT: Department card
PRC: Unit pricing card
MAX: Upper limit setting card
ERS: Erased card
SRV: Service card
(No indication): No card
[3] Card type
MGN: Magnetic card
OPT: Optical card
[1]
[2] [3] [4] [5] [6]
Press numeric
keypad key 6.
[4] Can status
OK: Normal scan
ERR: Scan error
NG: Nonstandard error
(No indication): No card
[5] Equipment status
IN: Initialization in progress
RDY: Ready
[6] Card reader version indication
Four-digit number
REF xxx ANT xxx
|ANT - LEF| xxx
REF: Toner reference voltage (A/D value)
ANT: Toner antenna voltage (A/D value)
ANT - LEF: Differential voltage (A/D value)
LAST of EXIT of
REG of CVR of
LAST: Last document detection sensor(PI3):
On/Paper presence, Of/Paper absence*1
EXIT: Delivery reversal sensor(PI6):
On/Paper presence, Of/Paper absence*1
REG: Registration paper sensor(PI8):
On/Paper presence, Of/Paper absence*1
CVR: Cover open/close sensor (PI10):
On/Paper presence, Of/Paper absence*1
*1:Only if equipped with ADF functions.
Press numeric
keypad key 7.
WID1 of WID2 of
LEN1 of LEN2 of
WID1: Document width sensor 1 (PI2):
On/Paper presence, Of/Paper absence *1
WID2: Document width sensor 2 (PI1):
On/Paper presence, Of/Paper absence *1
LEN1: Document length sensor 1(PI4):
On/Paper presence, Of/Paper absence *1
LEN2: Document length sensor 2(PI5):
On/Paper presence, Of/Paper absence
*1
*1:Only if equipped with ADF functions.
Press numeric
keypad key 8.
D+Temp xxxx E+Hum xxxx
F+Temp
D+Temp: In-machine temperature (Unit: deg C)
E+Hum: In-machine humidity (Unit: %RH)
F+Temp: Fixing roller temperature (Unit: deg C)
Press numeric
keypad key 9.
BCST: Document platen cover sensor (SR402): On/Cover open, Of/Cover closed
BDOC: Document size: Paper size indicated in a mix of document size sensors
BDSS3-0 [of of of of]:
Document size sensor (SR404 or SR405): On/Document presence, Of/Document absence
Document size sensor (SR403): On/Document presence, Of/Document absence
Document size sensor (SR401): On/Document presence, Of/Document absence
Document size sensor (SR402): On/Document presence, Of/Document absence