manualshive.com logo in svg

Canon iR2030, Service Manual

Share
Download
Canon iR2030 Service Manual Download Page 222

Chapter 8  

8-2

F-8-2

8.2 Various Control Mechanisms

8.2.1 Controlling the Speed of the Fixing Film

8.2.1.1 Controlling the Fixing Film Speed

0017-5470

iR2022i / iR2025 / iR2030 / iR2018  / iR2022 / iR2018i

The rotation cycle is measured with reference to the mark provided at the end of the fixing film to rotate the fixing drive motor at the optimum speed, thus keeping
the paper feed speed constant. Measurement of the cycle of each rotation (excluding the initial rotation and post-rotation) of the fixing drive motor starts when 1
second lapses after the motor starts rotating and ends when the trailing edge of the last sheet has passed through the fixing nipper.

F-8-3

[1] Film rotation detection signal (FILM_SENS): Set to 1 and 0 alternately when the fixing film is rotating.

[2] Rotation cycle measurement mark

8.2.2 Controlling the Fixing Film Temperature

8.2.2.1 Outline

0017-5473

iR2022i / iR2025 / iR2030 / iR2018  / iR2022 / iR2018i

The surface temperature of the fixing heater is detected to control the fixing heater drive signal so that the fixing heater temperature becomes the target temperature.
The temperature of the fixing heater is detected by the thermistor (TH1/TH2) provided on the fixing heater. If the surface temperature rises, the resistance of the
thermistor lowers and the voltage of the fixing heater temperature detection signal (M_TH/S_TH) also lowers.

[1]

Fixing film speed sensor

[4]

Thermo-switch (TP1)

[2]

Sub thermistor (TH2)

[5]

Pressure roller

[3]

Main thermistor (TH1)

[6]

Fixing film unit

[1]

[2]

[3]

[4]

[5]

[6]

DC Controller PCB

[1] FILM_SENS

[2]

J217

Summary of Contents for iR2030



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands