Canon iPF830 Series Basic Manual Download Page 65

Page: 65 / 146

Back

Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.

USB Port
Connect a USB cable to this port. The printer is compatible with Hi-Speed USB connections.

Ethernet Port
Connect an Ethernet cable to this port. The lamp is lit if the Ethernet cable is connected correctly and commu-
nication is possible between the computer and printer.

Manual Pocket
Store printer manuals in this pocket.

Accessory Pocket
Store assembly tools, Roll Holder attachments, and other items in this pocket.

Power Supply Connector
Connect the power cord to this connector.

Media Take-up Unit Power Inlet
Connect the connection cable for the Media Take-up Unit (optional).

iPF830 Series

Back

Basic Guide

Printer Parts

Printer parts

Summary of Contents for iPF830 Series



















































































































































Search results

Summary of Contents for iPF830 Series

Reviews:

Brands by name

Popular brands

Canon iPF830 Series, Basic Manual

Search results

Summary of Contents for iPF830 Series

Reviews:

Brands by name

Popular brands