manualshive.com logo in svg

Canon iPF830 Series, Basic Manual

Share
Download
Canon iPF830 Series Basic Manual Download Page 103

Cause

Corrective Action

Remove the foreign object from the Media Take-up
Sensor path. Arrange the Basket Cloth and Basket
Rod so they do not interfere with the Media Take-
up Sensor.

The Media Take-up Sensor cord is not connected to the Right Media Take-up
Unit correctly.

Reconnect the Media Take-up Sensor cord as fol-
lows.

1.

Turn the printer off.

2.

Disconnect the Media Take-up Sensor cord
from the Right Media Take-up Unit and recon-
nect it firmly, all the way in.

3.

Turn the printer on.

 (See "Using the Media Take-up
Unit.")

➔

User's Guide

If the Media Take-up Unit continues rotating, con-
tact your Canon dealer for assistance.

The size of clear film cannot be detected

The size of clear film cannot be detected

Cause

Corrective Action

The Platen is soiled with ink or other substances.

Open the Top Cover and clean the entire Platen.
 (See "Cleaning Inside the Top Cover.")

➔

P.47

iPF830 Series

                                                                                                                                                     

The size of clear film cannot be detected

Basic Guide

                                                                                                                                                                                                                       

   

Troubleshooting

Problems Regarding Paper

103

 

Summary of Contents for iPF830 Series



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands