Canon IP2800 series, Manual

Page: 236 / 326

Restrictions on Printer Sharing
If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when
reading this information.
These are restrictions that apply when you are using a printer in a network environment. Check the
restrictions for the environment you are using.
When You Are Sharing a Printer in a Network
• A print completion message may be displayed. To disable the message from being displayed, follow
the procedure below.
◦ If you are using Windows 8:
In the Devices and Printers window of the client, select the printer from Printers , and click Print
server properties on the command bar.
Uncheck Show informational notifications for network printers on the Advanced tab, and
then restart the computer.
◦ If you are using Windows 7:
In the Devices and Printers window of the client, select the printer from Printers and Faxes , and
click Print server properties on the command bar.
Uncheck Show informational notifications for network printers on the Advanced tab, and
then restart the computer.
◦ If you are using Windows Vista:
Press the Alt key from the Printers window on the client system. Open Run as administrator ->
Server Properties... from the displayed File menu.
Uncheck Show informational notifications for network printers on the Advanced tab, and
then restart the computer.
◦ If you are using Windows XP:
Open Server Properties from the File menu of the Printers and Faxes window on the print
server system.
Uncheck
Notify when remote documents are printed on the Advanced tab, and then restart
the computer.
• The bi-directional communication function is disabled and the correct printer status may not be
recognized.
If a client user opens the printer driver properties (to display the properties when using Windows 8 or
Windows 7, press the Alt key, and select
Printer properties from the displayed File menu) and then
clicks OK with the Enable bidirectional support check box cleared on the Ports tab, the
bidirectional communication function of the print server may also be disabled.
In this case, check
Enable bidirectional support check box on both the print server system and the
client system.
• When you print from a client system, you cannot use Canon IJ Preview.
• When the functions on the
Maintenance tab cannot be set properly from a client system, they may be
grayed out. In this case, change the settings from the print server.
When you change the settings of the print server, you should delete the icon of the shared printer
from the client system, and then specify the shared settings again in the client system.
236