Canon imageRUNNER C1335 Series, Service Manual

Page: 289 / 607

4
4
4-139
4-139
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit / Pressure Roller Unit > Procedure
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit / Pressure Roller Unit > Procedure
2) Turn the gear [1] to engage the Fixing Film Unit [2] and the Pressure Roller Unit [3].
[1]
[2]
[3]
3) Remove the 2 Fixing Pressure Plates (Front and Rear) [1].
• 2 Pressure Springs [2]
• 2 Hooks [3]
[1]
[1]
[2]
[2]
[3]
[3]
F-4-351
F-4-352
NOTE: Procedure when installing the Pressure Springs [2].
In order to facilitate installation of the Pressure Spring, rotate the gear to have the cam
facing down, put a screwdriver [1] between the Fixing Pressure Plate (Front/Rear) and
the Side Plate and hold down the Fixing Plate while installing the Pressure Spring.
[1]
[2]
[A]
[3]
F-4-353
4) Move the Drawer Connector Unit [1], and disconnect the connector [2].
CAUTION:
Rotate the gear and disconnect the connector while paying attention not to have the
flag of the gear come in contact with the sensor.
[1]
[2]
1x
F-4-354