Canon imageRUNNER C1335 Series, Service Manual

Page: 276 / 607

4
4
4-126
4-126
Disassembly/Assembly > Image Formation System > Removing the Main Drive Unit > Procedure
Disassembly/Assembly > Image Formation System > Removing the Main Drive Unit > Procedure
NOTE: How to assemble the Main Drive Unit
When assembling the Main Drive Unit, make sure to align one of 3 protrusions of the
cam [2] on machine's side to the top position and then assemble it. If the position is
not aligned, the Main Drive Unit [1] and cam [2] on machine's side may fail to properly
assemble to cause the connection failure.
Also, check to make sure that there is no gap between the Rear Plate [A] and the plate [B]
of the Main Drive Unit [1].
If there is a gap, make sure to align one of 3 protrusions of the cam [2] on machine's
side to the top position and then assemble it.
[1]
[1]
[A]
[A]
[B]
[B]
[2]
[2]
F-4-319
NOTE: How to assemble the Main Drive Unit
Check that there is no gap and then secure using 6 screws in the order indicated by the
illustration below.
6x
F-4-320
NOTE: Actions after assembly
Execute Auto Adjust Gradation and Correct Print Color Mismatch.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust
Gradation > Full Adjust
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Correct Print
Color Mismatch