Canon imagerunner advance C5550i, User Manual

Page: 1090 / 1556

[Starting] The MEAP application is stopping.
● If you click the [Start] / [Stop] button located on the right side of the operation status, you can start/stop
the use of the MEAP application.
● If you click [Uninstall], the MEAP application is uninstalled.
● For the license status, one of the following is displayed.
Depending on the MEAP application, the license file may have a term of validity. In addition, the maximum
number (counter) for printing or scanning is predetermined.
[Installed] The valid license is installed.
[Not Installed] Unable to use the MEAP application as the license file is not installed or is disabled.
[Over Limit] Some counters set for the MEAP application exceed the maximum value.
[Invalid] The validity for the license file has expired or all counters set for the MEAP application exceed the
maximum value.
[Unnecessary] You can use the MEAP application even if you do not have a license file.
If [Over Limit] or [Invalid] appears
● If the validity of the license file expires or a counter exceeds the maximum value, the MEAP application
cannot be used. By adding a license, you can extend the validity or increase the counter's maximum value.
Managing MEAP Application Licenses(P. 1081)
[To Portal]/[Log Out]
Click to display the portal page of the Remote UI or the login screen of the Remote UI.
Starting or stopping the use of a MEAP application
If you selected [Only Install] in the installation of the MEAP application, you need to start the MEAP application.
When you update a MEAP application, stop the MEAP application.
1
Click [MEAP Application Management].
2
Click [Start] / [Stop] for the MEAP application to be used.
Appendix
1078