Canon imageRUNNER 3300, Function Manual, Page: 61 / 156

2
Erasing Shadows and Frame Lines (Frame Erase) 2-35
Scanning Or
iginals into a Mail Bo
x
If you press “Adjust All At Once,” select “Sides” and “Center,” and enter the value using
“–” or “+”
→ press “OK” → press “Done.”
The specified mode is set and the display returns to the Scan screen.
If you enter a value outside the setting range, a message prompting you to enter the
appropriate value appears in the screen.
NOTE
•
If you want to enter values in millimeters, press “mm.”
•
The default settings are 3/8"(10mm) for “Center” and 1/8" (4mm) for “Top,” “Left,” “Right,”
and “Bottom.”
•
If you press “Adjust Each Dim.,” and want to set the frame erase width uniformly around
the original, press “Adjust All At Once.”
6
Press (Start).
The machine starts scanning. (See ‘Storing Originals in the Mail Box,’ on p. 1-9.)
NOTE
•
To cancel the setting, press “Special Features” → “Frame Erase” → “Cancel,” in this order.
•
To cancel all settings at once, press “Initial Settings.” (The machine returns to the standard
scanning mode.)
•
To return the display to the Mail Box Selection screen, press (Reset).
E201box_INDEX.book Page 35 Thursday, May 24, 2001 12:04 AM