Canon imageRUNNER 3300, Function Manual, Page: 102 / 156

3
Printing a Document in a Mail Box After Changing the Settings 3-16
Using/Arr
anging Documents Stored in the Mail Bo
x
5
Press “Start Print.”
The machine starts printing. (See ‘Printing Documents Stored in the Mail Box,’ on p. 1-13.)
If there is a current job or reserved job, the machine starts printing after that job is
completed.
NOTE
•
To cancel the setting, press “Finisher” → “Cancel,” in this order.
•
To cancel all settings at once, press “Initial Settings.” (The machine returns to the standard
mode of Local Printing.)
•
To return the display to the Mail Box Selection screen, press (Reset).
Printing on Two Sides (Two-sided Printing)
You can print the facing pages of a document stored in a mail box on both sides of a sheet.
IMPORTANT
•
When the machine is operating in the Two-sided Printing mode, you cannot use the Booklet
mode.
•
Non-standard paper sizes cannot be used to make two-sided prints.
•
There are some types of paper which may meet these specifications, but which cannot be used
to print in the Two-sided Printing mode.
NOTE
•
Paper used to make two-sided prints must conform to the following specifications:
- Paper size: 11"x17", LGL, LTR, LTRR, STMTR, and EXEC
- Paper weight: 17-lb bond to 20-lb bond (64g/m 2 to 80g/m 2 )
•
When printing documents with an odd number of pages, the back of the last page is left blank.
(The machine’s counter does not count the blank page as a print.)
•
To make two-sided prints from different size originals, specify the paper size beforehand. If not,
these originals will be output as one-sided prints on a paper size which suits their individual
sizes.
Selected documents
Prints
E201box_INDEX.book Page 16 Thursday, May 24, 2001 12:04 AM