Canon imageRUNNER 2545i, System Settings Manual

Page: 32 / 314

Setup Procedure 1-19
Be
fo
re
Y
o
u S
tar
t
1
Setup Procedure
Follow the procedure described below to set up the machine to use its functions.
IMPORTANT
•
It is recommended that the network administrator perform the following procedures.
•
Use the machine’s control panel if you are configuring the protocol settings for the first
time. After configuring the protocol settings, you can change the content by using the
Remote UI.
Connecting the Machine to a Network
Follow the setup procedure described here to connect the machine to a TCP/IP
network.
1
Network Cable Connection ( S ee Chapter 2, “Before You S tart U s in g the
Machine,” in the User’s Guide.)
Connect the machine to the network using network cables.
2 Interface S ettin gs ( S ee “Interface S ettin gs (Ethernet Driver),” on p. 2-2.)
Specify the interface settings for communication between the machine and computers on your network. To
specify the settings, use:
•
The machine’s control panel
•
The Remote UI (via a web browser)
3
Communication Environment S ettin gs ( S ee “Communication Environment
S ettin gs ,” on p. 2-5.)
Set up a configuration for communication between the machine and computers on your network. To specify
the settings, use:
•
The machine’s control panel
•
The Remote UI (via a web browser)
4
IEEE802.1X Authentication S ettin gs ( S ee “IEEE802.1X Authentication
S ettin gs ,” on p. 2-9.)
If access to your network requires authentication to a RADIUS server, specify the settings of IEEE802.1X
authentication.