Canon imageRUNNER 2545i, System Settings Manual

Page: 145 / 314

Specifying Communications Settings 4-10
Set
ti
ng t
h
e
Se
nd Fu
nctio
n
4
IMPORTANT
Since there is no way to check a stored password, make sure that you write it down,
and keep it in a safe place.
NOTE
If you make a mistake when entering the password, press (Clear)
➞
enter the
correct password.
5
S pecify the memory lock s ettin gs .
●
If you want to print the report s which are s et to be printed automatically
in Report S ettin gs :
4
If you want to s et a pa ss word for
the Memory Lock mode, enter a
pa
ss word u s in g - (numeric
key s )
➞
pre ss [Next].
If you do not want to set the Memory Lock
with a password, press [Next] without
entering any number.
Once the Memory Lock password is set, it
is necessary to enter the password when
you want to change the Memory Lock
Settings, except when you have logged in
to the machine by entering the System
Manager ID and System Password.
You cannot store a password that only
consists of zeros, such as <0000000>.
If you enter fewer than seven digits, the
machine stores the password with leading
zeros.
Example: If <02> or <002> is entered,
<0000002> is stored.
❑
Press [On] for <Report Print>.
If you do not want to print these reports,
press [Off].