Canon ImageRunner 2030i, Reference Manual, Page: 91 / 412

Making Prints Using the Stack Bypass 2-38
2
B
a
si
c O
p
e
ra
tio
ns
❑
Press [X] to specify the horizontal axis of the paper
➞
enter a value.
❑
Press [Y] to specify the vertical axis of the paper size
➞
enter a value.
❑
Press [OK].
The display returns to the paper size selection screen.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
➞
enter the correct values.
•
For instructions on entering the values in inches, see “Values in Inches,” on
p. 2-21.
•
To enter values in millimeters, press [mm].
•
When entering the value in millimeters, you can also use - (numeric keys),
and (Clear) to clear your entry.
•
When entering the value in millimeters, you can also change the value by pressing
[-] or [+] in increments of 1.0 mm, even if you have entered the value.
•
You can use values for [X] between 5 7/8" (148 mm) and 17" (432 mm), and for [Y]
between 3 3/4" (95 mm) and 11 11/16" (297 mm).