Canon ImageRunner 2030i, Reference Manual, Page: 384 / 412

List of Error Messages 8-43
8
T
rou
b
les
hoo
tin
g
Return page 1 to the top, and then press the Start key.
Cause Scanning was stopped due to a problem with the feeder.
Remedy Arrange the originals in page order with the first page on top. Place the originals
back into the feeder’s original supply tray, and then press
(Start).
Waste toner is full./Replace the drum.
Cause The drum unit is filled with waste toner.
Remedy Contact your local authorized Canon dealer.
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and
perform the necessary operations according to the error code displayed. You can
check the error code on the Details screen when you press [Log] on the System
Monitor screen. (See “Copy/Print Job Details,” on p. 5-9.)
If a send, receive, or fax job does not complete successfully, the error code is
printed in the Results column on the Activity Report and TX Report. (See Chapter
11, “Printing Communication Reports,” in the
Sending and Facsimile Guide .)
Perform the necessary procedures according to the error code.
NOTE
If a send job is canceled, “STOP” is printed in the Results column on the TX Report.
# 001
Cause Paper or originals are jammed.
Remedy Remove any jammed paper or originals. (See “Clearing Paper Jams,” on p. 8-3,
and “Feeder,” on p. 8-15.)