Canon ImageRunner 2030i, Reference Manual, Page: 172 / 412

Specifying Common Settings 4-37
4
C
u
s
tom
iz
ing
Set
ting
s
Energy Consumption in the Sleep Mode
You can set the amount of energy that the machine consumes when it is in the
Sleep mode.
NOTE
•
If there is a job which has been reserved for delayed sending, the machine will not enter
the Sleep mode completely.
•
If you are using a management application to view or manage the settings and status of
the machine via the network, the machine may not enter the Sleep mode completely.
•
If you are using the machine as a Windows printer, the machine may not enter the Sleep
mode completely if SNMP Status is enabled for your operating system (unless your
computer is turned OFF). For more information on disabling SNMP Status, contact your
network administrator.
•
The default setting is ‘Low’.
•
The energy consumption level in the Sleep mode is ‘High’ even when the energy
consumption level is set to ‘Low’, such as when a job is being processed (including a
forwarding job, report job, receive job, or sending a forwarding done notice).
•
For information on each setting, see the Sending and Facsimile Guide , or Network
Guide .
1
Press (Additional Functions)
➞
[Common Settings].
If necessary, see the screen shot in step 1 of “ Initial Function at Power ON, ” on
p. 4-17.
2
Press [
▼
] or [
▲
] until [Energy Consumption in Sleep Mode]
appears
➞
press [Energy Consumption in Sleep Mode].