Canon ImageRunner 2030i, Reference Manual, Page: 383 / 412

List of Error Messages 8-42
8
T
rou
b
les
hoo
tin
g
LTR Load Paper.
Cause The optimum paper size selected by the Automatic Paper Selection mode is not
available in the machine.
Remedy 1 Load the indicated paper size into the machine. If you press (Start) while this
message is displayed, prints are made with the currently selected paper size.
Remedy 2 If the message continues to be displayed even if the indicated paper size is
loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the
Additional Functions screen) for that paper drawer to ‘On’. (See “Auto Paper
Selection/Auto Drawer Switching,” on p. 4-30.)
Place the original on the platen glass.
Cause The specified mode requires that the original be placed on the platen glass, but
there is no original on the platen glass.
Remedy Place the original on the platen glass.
Platen glass is dirty.
Cause The feeder’s scanning area is dirty.
Remedy Clean the feeder’s scanning area. (See “Manual Feeder Cleaning,” on p. 7-27.)
Remove the original from the feeder.
Cause The machine cannot scan your original using the feeder. An original is placed in
the feeder and on the platen glass.
Remedy Remove the original from the feeder and platen glass.
Remove the paper from the output tray.
Cause Prints from the previous job remain in the output tray.
Remedy Remove the prints remaining in the output tray. Printing automatically resumes.
Replace the toner.
Cause Printing is not possible because the toner has run out.
Remedy Replace the toner cartridge. (See “Replacing the Toner Cartridge,” on p. 7-19.)