manualshive.com logo in svg

Canon ImageRunner 2030i, Reference Manual, Page: 315 / 412

Share
Download
Canon ImageRunner 2030i Reference Manual Download Page 315

Replacing the Toner Cartridge

7-22

7

R

outi

n

e

 Ma

int

ena

nc

e

WARNING

 

Do not throw used toner cartridges into open flames, as they may ignite 
the toner remaining inside the toner cartridge, and result in burns or a fire.

4

Rock the new toner cartridge back and forth (five or six times) 
to distribute the toner evenly inside the toner cartridge.

IMPORTANT

 

If the toner is not distributed evenly inside the toner cartridge, print quality may 
deteriorate.

5

Make sure that the side with the label is facing up, and insert 
the new toner cartridge into the machine as far as it will go.

Support the new toner cartridge with one hand from underneath, while pushing it 
into the machine with your other hand.

Summary of Contents for ImageRunner 2030i





























































































































































































































































































































































































































Reviews:

No comments