manualshive.com logo in svg

Canon ImageRunner 2030i, Reference Manual, Page: 66 / 412

Share
Download
Canon ImageRunner 2030i Reference Manual Download Page 66

Using the Touch Panel Display

2-13

2

B

a

si

c O

p

e

ra

tio

ns

Using the Touch Panel Display

This section describes the keys that are frequently used on the touch panel display. 
Information on how to adjust the brightness of the touch panel display is also 
provided.

CAUTION

 

Press the touch panel display keys gently with your fingers. Do not press the 
touch panel display with a pencil, ballpoint pen, or other sharp objects that can 
scratch the surface of the touch panel display or break it.

NOTE

 

Before using the touch panel display, peel off the protective film from the display. 

 

Frequently Used Keys

The following keys on the touch panel display are used frequently:

Press to cancel the mode that you are currently setting, or a mode 
that has already been set, on screens other than the Additional 
Functions screen. Also, press to close the current mode’s setting 
screen, and keep the original settings set from the Additional 
Functions screen.

Press to confirm the current settings and proceed to the next step in 
the procedure.

Press to go back to the previous step in the procedure, without 
saving the current settings.

Press to close the current screen.

Press to confirm the current settings of a mode.

Summary of Contents for ImageRunner 2030i





























































































































































































































































































































































































































Reviews:

No comments