Canon imagePROGRAF iPF820 User Manual Download Page 594

Page: 594 / 702

Printheads

Replacing the Printhead

Follow these steps to replace the Printhead. Failure to follow this procedure may cause ink to leak from the
Printhead, resulting in stains.

Caution

•

When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The

metal parts of the Printhead become hot during printing, and there is a risk of burns from touching

these parts.

Note

•

Prepare a new Ink Tank when ink levels are low.

•

Your hands may become dirty during Printhead replacement. Use the gloves provided with the new

Printhead for replacement.

•

Choose

Auto Print

to have the printer automatically adjust the Printhead alignment after

replacement of the Printhead. (→P.53)

If the roll is not ejected because of the cutting method selected, cut it manually and remove it.

(→P.366)

Clean inside the Top Cover. (→P.597)

Press the

Menu

button to display

MAIN MENU

Press

▲

▼

to select

Maintenance

, and then press the

►

button.

Press

▲

▼

to select

Replace P.head

, and then press the

►

button.

Press

▲

▼

to select

Yes

, and then press the

button.

Ink is now lled.

After about two minutes, a message is shown on the Display Screen instructing you to open

the Top Cover.

Open the Top Cover.

Instructions are now shown on the Display Screen regarding Printhead replacement.

580 Maintenance

Summary of Contents for imagePROGRAF iPF820































































































































































































































































































































































































































































































































































































































































































































Canon imagePROGRAF iPF820, User Manual, Page: 594 / 702

Search results

Summary of Contents for imagePROGRAF iPF820

Reviews: