Canon imagePROGRAF iPF820, User Manual, Page: 302 / 702

Printing banners or at other non-standard sizes
Printing Vertical or Horizontal Banners (Large-Format
Printing; Windows)
This topic describes how to print a banner about ve times as long as the roll width based on the following example.
•
Document: A horizontal banner created in Microsoft Word
•
Page size: Non-standard (100×500 mm [3.9×19.7 in])
•
Paper: Roll
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1.
Register a Custom Paper Size .
Banners tend to be in non-standard sizes, so register a Custom Paper Size . In this example, 100×500
mm (3.9×19.7 in) is registered.
2.
In the application, create an original in the size you registered.
3.
Print the banner, using the settings that correspond to banners.
Registering a Custom Paper Size
This example describes how to register a paper size that is horizontally elongated and suitable for banners in
either horizontal or vertical format.
1.
Display the printer driver dialog box. (→P.383)
2.
Click the Page Setup tab to display the Page Setup sheet.
3.
In the
L
Paper Source list, click to select the feed method set for the specied paper. In this
case, choose from Roll Paper (Auto) , Roll Paper 1 , or Roll Paper 2 .
4.
Click
O
Paper Size Options to display the Paper Size Options dialog box.
5.
Enter a desired paper name in Custom Paper Size Name . “My Horizontal Banner” is used
in this example.
6.
In Units , click mm .
7.
Under Paper Size , enter “100” in Width and “500” in Height .
8.
Click Add to add the paper size of “My Horizontal Banner.”
9.
Click OK to close the Paper Size Options dialog box.
288 Enhanced Printing Options