Canon imagePROGRAF iPF820, User Manual, Page: 161 / 702

Handling rolls
5.
Use a size of paper that matches the width specied in the print job.
When both loaded rolls match the width of paper in the print job or the width is not specied in
the job, the sixth condition determines which roll is used.
When Width Detection is set to Off , the seventh condition determines which roll is used.
Note
•
When neither loaded roll matches the width specied in the print job, an error message is displayed.
6.
Use a size of paper that accommodates the width specied in the print job.
When both loaded rolls can accommodate the width specied in the print job, the seventh
condition determines which roll is used.
Note
•
When Detect Mismatch in the printer menu is set to Warning or None , the roll is determined
by the following conditions.
•
When neither loaded roll is wide enough for the print job and Detect Mismatch in the printer menu is
set to Pause , an error message is displayed.
7.
The roll closest to the roll width specied in the print job is used.
If both rolls are equally close to the specied width, the currently advanced roll is used.
Handling Paper 147