40
Replacing the Printhead
When handling the Printhead
, always hold it by the
grips (a). Never touch the nozzles (b) or metal contacts
(c). This may damage the Printhead
and affect printing
quality.
•
If you need to put a Printhead
somewhere temporarily before installation, do not keep the nozzles and
metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing
quality.
•
The inside surfaces of Safety Cap 1
(a) and Safety Cap 2
(b) are coated with ink to protect the nozzles.
Be careful not to touch these surfaces when removing the caps.
•
Never touch the ink supply section (d). This may cause printing problems.
•
The Printhead
contains ink to protect the nozzles. We recommend removing Safety Cap 2
(b) as you
hold it over the Printhead
package or safely out of the way to avoid spilling ink and staining your clothes
or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.
•
Do not reattach the Safety Cap
or protective material. Dispose of these materials in accordance with
local regulations.
•
7
8
Holding the new Printhead
by the grips (a), remove it from
the case.
While
fi
rmly holding the Printhead
you have removed, use
your other hand to remove the orange Safety Cap 1
(a).
Squeeze the grips (c) of Safety Cap 2
(b) and pull it down
to remove it.
a
a
b
c
a
a
b
d
c
Summary of Contents for imagePROGRAF iPF815
Page 47: ......
