background image

Important

There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during replacement.
The ink may stain clothing.

Do not open the Printhead pouch until immediately before installation. After removing the Printhead from the pouch,
install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out, which may affect printing
quality.

Access the menu for Printhead replacement

Caution

When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of the
Printhead become hot during printing, and there is a risk of burns from touching these parts.

Important

Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for re-
placement.

Note

Prepare a new Ink Tank when ink levels are low.

When the remaining capacity of Maintenance cartridge is low, prepare a new Maintenance cartridge.

1

Remove any paper that has been advanced by selecting 

Eject Paper

 in the Control Panel menu.

When using a roll, rewind it.
 (See "Removing the Roll from the Printer.")

→P.14

When using sheets, remove the sheet.
 (See "Removing Sheets.")

→P.23

2

Clean inside the Top Cover.  (See "Cleaning Inside the Top Cover.")

→P.46

3

 

On the 

Tab Selection screen

 of the Control Panel, press 

 or

 to select the Settings/Adj. tab (

).

Note

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

4

Press the 

OK

 button.

The 

Set./Adj. Menu

 is displayed.

5

Press 

 or 

 to select 

Maintenance

, and then press the 

OK

 button.

6

Press 

 or 

 to select 

Replace P.head

, and then press the 

OK

 button.

7

Press 

 or 

 to select the Printhead for replacement.

Select 

Printhead L

 when replacing the left printhead and 

Printhead R

 when replacing the right printhead.

Make sure your selection is correct.

8

Press the 

OK

 button.

The ink begins to be drawn in, and instructions appear on the Display Screen after this has finished.
It takes about three minutes for the ink to be drawn in.

 

Replacing the Printhead

                                                                                                                                                                                             

iPF6400

                                                                                                                                                                                                                                  

Basic Guide

   

Consumables and Maintenance

Printheads

 

34

Summary of Contents for imagePROGRAF iPF6400















































































































































Reviews: