7
Close the Top Cover.
The contrast becomes uneven during printing
The contrast becomes uneven during printing
Cause
Corrective Action
The paper feed amount is out of adjustment.
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
→User's Guide
The type of paper specified in the printer driver
does not match the type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
→P.11
(See "Loading Sheets in the Feed Slot.")
→P.17
Make sure the same type of paper is specified in the printer driver as you have loaded
in the printer.
1.
Press the
Stop
button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
The length of printed images is inaccurate in the feeding direction
Cause
Corrective Action
In the Control Panel menu,
Adj. Priority
is
set to
Print Quality
.
Set
Adj. Priority
to
Print Length
in the Control Panel menu, and then execute
Adjust
Length
.
(See "Adjusting the Feed Amount.")
→User's Guide
The type of paper specified in the printer driv-
er does not match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
→P.11
(See "Loading Sheets in the Feed Slot.")
→P.17
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
Press the
Stop
button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Images are printed crooked
Images are printed crooked
Cause
Corrective Action
In the Control Panel menu,
Skew Check Lv.
is set to
Loose
or
Off
.
In the Control Panel menu, set
Skew Check Lv.
to
Standard
.
(See "Menu Settings.")
→User's Guide
In the Control Panel menu,
Width Detection
is set to
Off
.
Set
Width Detection
to
On
in the Control Panel menu.
(See "Menu Settings.")
→User's Guide
Roll paper is loaded askew.
If there is a gap between the roll paper and roll holder, reload the roll.
(See "Loading Rolls on the Roll Holder.")
→P.9
(See "Loading Rolls in the Printer.")
→P.11
iPF6400
The contrast becomes uneven during printing
Basic Guide
Troubleshooting
Problems with the printing quality
109
