Canon IMAGEPRESS C7010VPS, Operating Information Manual

Page: 240 / 388

#
NOTE
■
The paper trays hold approximately 3,500 sheets of paper (80 g/m2 / 22 lb Bond).
■
Only load the following ISO sizes: 330.2 mm × 482.6 mm, 320 mm × 450 mm
(SRA3), 304.8 mm × 457.2 mm, A3, B4, A4, A4R, and B5 paper into the paper
tray. Other than A4 paper cannot be loaded horizontally.
■
Only load the following US sizes: 13" x 19", 12.60" x 17.72", 12" x 18", 11" x
17", LGL, LTR, or LTRR paper into the paper deck. Only LTR paper can be
loaded horizontally into the paper deck.
■
For more information on the size change plate, see ‘Adjust the media size for the
bulk media module (optional)’ on page 242
■
Hot air that is blown by the fan may warm the inner size change plate of the paper
tray.
■
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
■
When paper is loaded in the paper tray, the side facing up is the one printed on.
■
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it. However, you cannot turn the texture paper and 1-sided
coated paper over. Change the new paper.
5.
Lower the feeding support roller.
6.
Close the paper tray.
The inside lifter automatically rises, and prepares the paper tray for printing.
Chapter 9 - Paper, toner, and staples 240
Load the media into the bulk media module (optional)