Canon IMAGEPRESS C7010VPS, Operating Information Manual, Page: 188 / 388

#
IMPORTANT
■
Thin originals may become creased, if used in a high temperature or high humid-
ity environment.
■
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
■
If the same original is fed through the feeder repeatedly, the original may fold or
become creased, and make feeding impossible. Limit repeated feeding to a maxi-
mum of 30 times (this number varies, depending on the type and quality of the
original).
■
If the feeder rollers are dirty from scanning originals written in pencil, perform
the feeder cleaning procedure.
‘Clean the ADF rollers’ on page 337
■
Always smooth out any folds in your originals before placing them into the feeder.
Feed originals to the ADF (optional)
1.
Adjust the slide guides to fit the size of your originals.
Chapter 7 - Copy jobs 188
Feed originals to the ADF (optional)