Countermeasure against shaving on the shaft of the upper
registration roller
[Symptom/Question]
Shavings [a] of the shaft may be attached around the both ends of the upper registration roller [1] in the machine earlier than the
following countermeasure cut-in serial numbers in factory.
[Cause]
After some endurance time has elapsed, the outer periphery of the bearing of upper registration roller and the inner periphery of
the roller scuff and shave each other, and this leads to the above mentioned symptom.
[Remedy/Answer]
When the aforementioned symptom has occurred, prepare and replace with the new type upper registration roller (FM1-F405-010)
referring to the "Replacement Manual for Durability Enhancement Parts". When to replace, first wipe off the shavings before
performing the work.
[Service Parts]
No.
Part Number
Description
Q'ty
Fig.No.
1
Old
FM1-F405-000
ROLLER, REGISTRATION, UPPER
1 -> 0
320
New
FM1-F405-010
ROLLER, REGISTRATION, UPPER
0 -> 1
[Countermeasure cut-in serial numbers in factory]
Model
Serial No.
imagePRESS C10000VP Series ME US
WBC10777
imagePRESS C10000VP Series ME CN
WBD00550
imagePRESS C10000VP Series ME EUO
WEJ10827
247
Summary of Contents for imagePRESS C10000VPSeries
