Troubleshooting
79
ENGLISH
The Flatbed Scanner (Option) Does Not Work
Operational failure of the optional flatbed scanner unit can be caused by any
of the reasons described below. Try the solution according to the problem.
Cause
The ISIS/TWAIN scanner is set to something other than
Flatbed.
Remedy
Set the ISIS/TWAIN driver to Flatbed. Refer to Help for the
ISIS/TWAIN Driver for information about the ISIS/TWAIN
Driver settings.
Cause
The interface connector is not connected.
Remedy
Check the connections between the DR-2580C and the flatbed
scanner unit.
Cause
The DR-2580C is not installed correctly.
Remedy
Check the document size, thickness, and paper type. Remove the
DR-2580C scanner and then reinstall it correctly.
Cause
The hook is not correctly attached to the DR-2580C.
Remedy
Remove the DR-2580C scanner and then reinstall it correctly.
Cause
The DR-2580C scanner was installed without removing the
transport locks.
Remedy
Remove the DR-2580C scanner and remove the transport locks.
For information about removing the flatbed scanner unit, see the manual that
comes with it.
Summary of Contents for imageFORMULA DR-2580C
