manualshive.com logo in svg

Canon imageFORMULA DR-2580C, Service Manual

The Canon imageFORMULA DR-2580C is a high-performance document scanner that offers fast and reliable scanning for both home and office use. With its compact design and advanced features, this versatile scanner allows you to easily digitize your documents with exceptional image quality. Find the free brochure, detailed specs, and user manual for download on our website.

Share
Download
background image

50

Using the Scanner

Placing a Document for Scanning

There are two methods for paper separation, called the Page Separation mode
and Bypass mode for feeding documents. Feeding documents continuously
from a stack of documents placed in the feed tray is called the Page
Separation mode. Feeding documents one sheet at a time by hand or feeding
multiple sheet documents, such as invoices that are attached at one end, is
called the Bypass mode. The document feed method can be switched by
moving the Feed Selection Lever.

IMPORTANT

 • When placing a document for scanning, be careful to remove all paper

clips, staples, etc., from the document. During the scanning process, such
objects can tear the document, cause a paper jam, and damage the scanner.

 • Do not wear loose clothing or jewelry that may get caught in the scanner

while you are operating it. If they get caught in the scanner it may cause an
injury. Be extra careful of neckties and long hair. If anything gets caught in
the scanner, quickly unplug the scanner to stop it.

 • If the leading edge of the documents are curled, they may cause a paper

jam. If the curls are large, straighten them out before scanning.

How to Feed with the Page Separation Mode

1

Move the feed selection lever to the page separation (

) side.

Summary of Contents for imageFORMULA DR-2580C































































































































































































































































Reviews:

No comments

Related manuals for imageFORMULA DR-2580C

3nStar SC550 User Manual preview
SC550
Brand: 3nStar Pages: 2
Pakon F-335 Series User Manual preview
F-335 Series
Brand: Pakon Pages: 24
Safran MorphoSmart MSO1300 Installation Manual preview
MorphoSmart MSO1300
Brand: Safran Pages: 44
RAYLASE MINISCAN II Series Manual preview
MINISCAN II Series
Brand: RAYLASE Pages: 35
Plustek MobileOffice H100 Specification preview
MobileOffice H100
Brand: Plustek Pages: 2
Plustek OPTICPRO 12000P TURBO User Manual preview
OPTICPRO 12000P TURBO
Brand: Plustek Pages: 38
CUMMINS ALLISON Universal JetScan 4161 User Manual preview
Universal JetScan 4161
Brand: CUMMINS ALLISON Pages: 22
Garnet SeeLevel 710-AR Manual preview
SeeLevel 710-AR
Brand: Garnet Pages: 12
Opticon DFM 1000 User Manual preview
DFM 1000
Brand: Opticon Pages: 20
Garnet SeeLevel 710-JS Manual preview
SeeLevel 710-JS
Brand: Garnet Pages: 12
Zirkon zahn S600 ARTI Operator And Maintenance Manual preview
S600 ARTI
Brand: Zirkon zahn Pages: 40
Unisys My VisionX Operator'S Manual preview
My VisionX
Brand: Unisys Pages: 54
Keithley 7057A Instruction Manual preview
7057A
Brand: Keithley Pages: 35
Unitech MS337 User Manual preview
MS337
Brand: Unitech Pages: 89
Canon Microfilm Scanner 350 Instruction Manual preview
Microfilm Scanner 350
Brand: Canon Pages: 60
Canon CanoScan D1230U Product Manual preview
CanoScan D1230U
Brand: Canon Pages: 24
Canon CanoScan 9950F Service Manual preview
CanoScan 9950F
Brand: Canon Pages: 30
Canon CanoScan FB 320P Product Manual preview
CanoScan FB 320P
Brand: Canon Pages: 79

Brands by name

Popular brands

Load more brands