manualshive.com logo in svg

Canon imageCLASS D480, Basic Operation Manual

Share
Download
Canon imageCLASS D480 Basic Operation Manual Download Page 185

10-14

M

aint

enanc

e 

Replacing the Toner Cartridge

 8

 

Place the toner cartridge on a fl at surface 
and pull the seal completely out. 

 

 

If toner is adhered on the removed seal, be careful 
that your hands or clothes do not get dirty from 
touching the toner.

Do not pull the seal out at an angle.

 9

 

Hold the toner cartridge by its handle (A). 

 

 

Do not open the drum protective shutter on the 
toner cartridge. Print quality may deteriorate if the 
drum surface is exposed to light or is damaged.

Always hold the toner cartridge by its handle.

  10

10

  Insert the toner cartridge so that the 

protrusion (A) on the right side of the 
toner cartridge fi ts into the guide (B) 
located on the right side of the machine 
and slide it down parallel to the guide. 

 

 

 11

 12

 13

Summary of Contents for imageCLASS D480























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands