Canon GX5000 Series Online Manual Download Page 64

Page: 64 / 390

Appears after performing network setup and clicking

Set

to close the window.

•

Requires Setup

•

Indicates the printer is required to perform Wi-Fi setup.

Performing/Changing Wi-Fi Settings

•

Not Set

•

Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or
enable IPv6 on

Network Settings...

Performing/Changing Wi-Fi Settings

•

IP Address Overlap

•

Indicates the IP address is duplicated to another printer.

•

Unknown

•

Indicates the printer recognized as

Available

in the past cannot be used currently.

Note

• If

USB

is selected from the pulldown menu on the toolbar, nothing is displayed.

•

D: IP Address

Displays the printer IP address. Nothing is displayed if the printer status is

Requires Setup

Note

• If

USB

is selected from the pulldown menu on the toolbar, "-" is displayed.

E: Location

Displays the printer location if it is registered. Nothing is displayed if the printer status is

Requires

Setup

Note

• If

USB

is selected from the pulldown menu on the toolbar, nothing is displayed.

Assigning Printer Information

F: Connection Method

Displays printer connection method (wired LAN, Wi-Fi, or USB).

Note

• If

USB

is selected from the pulldown menu on the toolbar,

USB

is displayed.

• If the printer supports both of the LAN connection methods, the printer is recognized as two

printers and they are displayed separately. (The same numbers are displayed on

Serial Number

(Last 5 Digits)

• If the printer does not support wired LAN, wired LAN is not displayed.
• If you are using Wi-Fi Connection Assistant on the computer which does not support Wi-Fi, Wi-Fi

is not displayed.

G: Setting Method

Displays printer setting method.

•

Auto

•

Summary of Contents for GX5000 Series







































































































































































































































































































































































































Search results

Summary of Contents for GX5000 Series

Reviews:

Brands by name

Popular brands

Canon GX5000 Series, Online Manual

Search results

Summary of Contents for GX5000 Series

Reviews:

Brands by name

Popular brands