manualshive.com logo in svg

Canon GX5000 Series, Online Manual

Share
Download
Canon GX5000 Series Online Manual Download Page 59

Wi-Fi Connection Assistant

Wi-Fi Connection Assistant allows you to diagnose or repair the network status, and to perform printer
settings on network.

Use Wi-Fi Connection Assistant for:

• Searching printers on network and performing initial network setup for detected printers
• Performing initial network setup by connecting the printer and computer using a USB cable (Not

available for some models)

• Changing printer network settings
• Diagnosing the settings of the printer and those of computer on which Wi-Fi Connection Assistant is

installed if anything is wrong with connection. In addition, Wi-Fi Connection Assistant repairs the status
of the printer and computer (Not available for some models).

Important

• Depending on the printer you are using, an administrator password is already specified for the printer

•

at the time of purchase. When you change the network settings, authentication by the administrator
password is required.

For details:

Administrator Password

For improving security, we recommend to change the administrator password.

Change Administrator Password

• To use the printer over LAN, make sure you have the equipment necessary for the connection type,

such as a wireless router or a LAN cable.

• When you install Wi-Fi Connection Assistant, disable block function of firewall.
• Do not change network settings using Wi-Fi Connection Assistant while printing is in progress.

59

Summary of Contents for GX5000 Series







































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands