manualshive.com logo in svg

Canon GM2000 Series, Online Manual

Share
Download
Canon GM2000 Series Online Manual Download Page 366

5100

Cause

Printer error has occurred.

What to Do

If you are printing, press the printer's 

RESUME/CANCEL

 button to cancel printing, then turn off the

printer.

Check the following:

• Make sure print head holder motion is not impeded by protective material and tape for securing the

print head holder, jammed paper, etc.

Remove any impediment.

Important

• When clearing an impediment to print head holder motion, be careful not to touch clear film (A),

white belt (B), or tubes (C).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

Turn the printer back on.

If this does not solve the problem, contact your nearest Canon service center to request a repair.

Important

• Do not tilt the printer when moving it since the ink may leak out.
• When transporting the printer for repairing it, see Repairing Your Printer.

366

Summary of Contents for GM2000 Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands