Canon GM2000 Series Online Manual Download Page 326

Page: 326 / 371

1304

Cause

Paper is jammed when performing automatic duplex printing.

What to Do

Remove jammed paper.

• If the paper is jammed at the paper output slot:

1300

• If the paper is jammed inside the printer:

Paper Is Jammed inside Printer

• If the paper is jammed at the feed slot of the cassette:

After storing the output tray extension and the paper output tray, pull out the cassette and
remove the jammed paper slowly with both hands.

Important

• When checking the feed slot of the cassette or removing the jammed paper, do not turn the

printer upside down or tilt it. The ink may leak out.

• If none of the above is applied, see

Removing Jammed Paper from Rear Side

to open the rear

cover and to remove the paper.

Load paper properly.

Loading Paper in the Cassette
Loading Paper in the Rear Tray

Press printer's

RESUME/CANCEL

button.

The printer resumes printing. Reprint the page you were printing if it was not printed properly due to
the paper jam.

326

Summary of Contents for GM2000 Series




















































































































































































































































































































































































Search results

Summary of Contents for GM2000 Series

Reviews:

Brands by name

Popular brands

Canon GM2000 Series, Online Manual

Search results

Summary of Contents for GM2000 Series

Reviews:

Brands by name

Popular brands