manualshive.com logo in svg

Canon GM2000 Series, Online Manual

Share
Download
Canon GM2000 Series Online Manual Download Page 111

General Notices

Choosing a Location

Refer to "

Specifications

" in the Online manual for details on operating environment.

• Do not install the printer in a location that is unstable or subject to excessive vibration.
• Do not install the printer in locations that get very hot (direct sunlight, or close to a heating source),

very humid or dusty locations, or outdoors.

• Do not place the printer on a thick rug or carpet.
• Do not place the printer flush against a wall.

Power Supply

• Keep the area around the power outlet clear at all times so you can easily unplug the power cord if

necessary.

• Never remove the plug by pulling on the cord.

General Notices

• Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak.
• Do not place anything on top of the printer. Be especially careful to avoid metal objects such as

paper clips and staples, and containers holding flammable liquids such as alcohol or thinner.

• Modifying or dismantling the print head or ink bottles, such as by putting holes in them, could cause

the ink to leak out and cause a malfunction. We recommend that you do not modify or dismantle
them.

• Do not put the print head or ink bottles into a fire.

When using the optional FINE cartridge

• Do not throw FINE cartridges in the fire.

111

Summary of Contents for GM2000 Series




















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands