Canon G1020 Series, Online Manual

Page: 34 / 250

9. Set the paper size.
Press the Paper Select button (I) to switch to the same size as the loaded paper, then
press the OK button.
Note
• There are various types of paper, such as paper with a special surface coating for printing photos at
optimal quality and paper suitable for documents. Each media type has specific preset settings (how ink
is used and sprayed, distance from nozzles, etc.), that allow you to print to that type with optimal image
quality. The wrong paper settings may cause poor printout color quality or scratches on the printed
surface. If you notice blurring or uneven colors, increase the print quality setting and try printing again.
• To prevent incorrect printing, this printer has a function that detects whether the settings for the paper
size loaded on the rear tray matches the paper settings. Before printing, make print settings in
accordance with the paper size settings. When this function is enabled, the
Alarm lamp flashes if these
settings do not match to prevent incorrect printing. When the Alarm lamp flashes, check and correct the
paper settings.
• When printing on long-length paper, support the output paper with your hands or use the printer in a
place where the paper does not fall. If the paper falls, the printed side may become dirty or scratched.
Also, when supporting the paper with hands, be sure not to pull the paper forcefully while printing.
34