Canon FY8-13HR-000, Service Manual

Page: 22 / 105

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
CHAPTER 2 PREPARING FOR INSTALLATION
2-5
2.6 Setting Customer Expectations
If the site is ready, installation takes about one hour. The customer should be informed of
the following:
• Some nodes on the network may be unavailable for up to one hour.
• The copier may be unavailable for up to one hour.
• The network administrator needs to be available during the installation for network
connectivity.
Equipment downtime and impact on the network can be minimized if the network ad-
ministrator installs a network connector for the iR-M1 and confirms network func-
tionality with the connector in place before the date scheduled for the iR-M1 installa-
tion.
• The network administrator should have a networked computer available during the
installation. The appropriate software should already be installed. Documentation for
the networked computer and the network operating software should be available.
• The network administrator should install the user software shipped with the iR-M1
onto networked PC and Mac OS computers that will print to the iR-M1. User docu-
mentation is provided with the iR-M1.
Memo
This guide covers iR-M1 installation and service. It provides general infor-
mation on connecting the iR-M1 to the customer’s network. Network Setup
and configuration information goes beyond the scope of this guide. For net-
work Setup and configuration information, the network administrator
should refer to the Configuration Guide.