Canon FAXPHONE L100, Service Manual, Page: 98 / 186

4
4
4-44
4-44
Disassembly/Assembly > Controller System > Removing the Communication PCB Unit > Procedure
Disassembly/Assembly > Controller System > Removing the Communication PCB Unit > Procedure
CAUTION:
Be sure to keep the Transfer High Voltage Harness [1] from the Engine Controller PCB
when assembling.
[1] [1]
F-4-75
CAUTION:
Be sure to keep the AC cable [1] from the Fuse Holder [2] when assembling.
F-4-76
Removing the Communication PCB Unit
■ Preparation
1) Remove the Left Cover (Refer to page 4-27).
2) Remove the Right Cover (Refer to page 4-28).
3) Remove the Rear Cover (Refer to page 4-29).
■ Procedure
1) Disconnect the connector [1] and Flat Cable [2].
2) Free the harness [1] from the Harness Guide [A].
x2
[2]
[1]
[A]
3) Remove the Communication PCB Unit [1].
• 2 Screws (black TP) [2]
• 4 Hooks [3]
x2
[1]
[3]
[3]
[3]
[2]
[2]
F-4-77
F-4-78