1
1
1-10
1-10
Product Overview > Parts Name > Operation Panel (L150 / L150 CHN / L150 KOR / L154)
Product Overview > Parts Name > Operation Panel (L150 / L150 CHN / L150 KOR / L154)
No.
Name
Function
[7] [Status Monitor/Cancel]
key
Confirms and cancels a job. Also allows monitoring of this
product's status.
[Back] key
Returns to the screen one layer before.
[▲] Key
Selects the upper setting item or increases a setting value.
[▼] Key
Selects the lower setting item or decreases a setting value.
[◄] Key
Returns to the screen one layer before. Or moves the cursor
to the left. Press to lower the volume level when the fax tone is
playing.
[►] Key
Proceeds to the screen one layer after. Or moves the cursor to
the right. Press to raise the volume level when the fax tone is
playing.
[OK] key
Determines settings and registered data.
[Reset] key
Resets settings.
[8] [Processing/Data] lamp
Blinks in green when this product is running. Lights up in green
when a job is waiting.
[Error] lamp
Blinks in orange when an error occurs. Or lights up in orange
instead.
[9] [Hook] key
Push to dial with the telephone receiver of the external phone
on the hook.
[10] [Pause] key
Inserts a pause in the fax number.
[11] [One-touch Speed Dial]
keys
Specifies the destination registered to the One-Touch Dial
1-30..
[12]
[13] Onetouch Cover
By opening the Onetouch Cover, one-touch dials 16 to 30 are
enabled.
T-1-5
Operation Panel (L150 / L150 CHN / L150 KOR / L154)
[2] [3]
[1]
[4]
[5]
[6]
[7]
[8]
[10]
[11]
[9]
No.
Name
Function
[1] [Redial] key
Calls up the destination of last transmission. (This is enabled
only when the fax basic screen is displayed.)
[2] [Address Book] key
Searches the destination registered to One-Touch Dial and
Coded Dial by name.
[3] [Coded Dial] key
Specifies the destination registered to the Coded Dial.
[4] [FAX/COPY] key
Switches the mode between copy and fax.
[5] LCD
Displays a message or operation status. Displays menu,
selected item, texts, numbers and other information when
changing settings.
[6] [Menu] key
Registers various settings.
[Paper Settings] key
Specifies the paper size and type to place in the pickup tray.
[Report] key
Prints a report and list. Also allows to set whether to
automatically print a report.
[Clear] key
Deletes a text or number.
[Energy Saver] key/lamp
Manually sets and cancels energy saver mode.Lights up in
green when in the energy saver mode.
Numeric keys ([0]-[9])
Enters a text or number.
[*] key
Switches the text entry mode. Use to send the tone signal from
the dial line when sending fax.
[#] key
Use to enter a signal.
[Stop] key
Stops the job.
[Start] key/lamp
Starts copy or fax operation.Lights up in green when a copy or
fax operation is in starting state.
F-1-9