Canon F-1, Service Manual

Page: 151 / 179

5
5
5-17
5-17
Adjustments > Adjustment Method > Registration Roller Wheel Skew Adjustment
Adjustments > Adjustment Method > Registration Roller Wheel Skew Adjustment
2. Adjustment procedure
1) Remove the front cover.
2) Remove the left cover.
3) Remove the following parts.
• E-ring • Connector • Edge saddle(free the harness) • Plate
• Arm • Reuse band • Screw
Plate Reuse band
E-ring
Arm
Connector Edge saddle
Screw
4) Remove the feeder cover in the direction of the arrow.
F-5-19
F-5-20
5) Remove the screw and temporary tighten it in the screw hole.
Screw
Plate Screw hole
6) Loosen the screw and adjust the plate position.
In case of A > B, move it upward.
In case of A < B, move it downward.
Marking line
Screw
Plate
7) After adjustment, tighten the 2 screws.
8) Printout a test chart again and check that the skew is corrected.
F-5-21
F-5-22